Bark’n Boots™ Grip Trex™ Sizing

Q: How do I determine which size boot will best fit my canine companion?

A: Please follow the instructions below to determine proper sizing for our Bark’n Boots™ Grip Trex™:

How To Size Bark’n Boots™ Grip Trex™
Primary Measurement - Paw Width

1. Have your dog stand on a firm surface (wood, linoleum or concrete).
2. Place a piece of blank paper under front paw.
3. Lift dog’s opposite front paw so that weight is placed firmly onto the foot being measured.
4. Mark the paper at paw’s widest point on the left and right edges of the paw. See graphic.
5. Use a ruler to measure the width of the paw from the left mark to the right mark (sizing measurements in inches).
6. Use chart to find the proper size. For example: If the width is measured between 2.25” and 2.5”, the dog would wear a Small boot, between 2.75” and 3.0” would wear a Large, etc.

Secondary Measurement - Paw Length

1. Measure the distance from the tip of the dog’s toes underneath the foot pad and up to the carpal pad. Note: The carpal pad is the circular pad just below the wrist on the front leg. See graphic for location.

2. Use the sizing chart to verify that at the proper width your dog’s paw length exceeds the listed measurement. For example: Medium boots will work for dogs with a paw length that exceeds 4.5”.

Boot Sizing Chart
size paw width† paw length‡
XS 2.25" 3.5"
S 2.5" 3.75"
M 2.75" 4.5"
L 3.0" 5.75"
XL 3.25" 6.75"
XXL 3.75" 8.0"
†width=measurement across widest part of paw, when bearing weight
‡length=measurement from toe tips to below carpal pad

Please let us know if you have questions or if you would like assistance once the measurements have been taken (888-783-3932).